Description
Features
- NEW "Shear Energy" - a reduction in energy requirements while maximizing performance!
- NEW "Multi-Power" - included "Multi-Volt" and "Multi-Phase". Allows for infield conversion to 208-240 volt and/or single to three phase with ease.
- STEMSURE™ - soft start to protect glasses and dishes from chipping and breaking
- Wash Refresh™ - Automatically drain the water for the next cycle, ensuring heavily soiled items are always sanitized with new wash water
- Rinse Sentry - extends the cycle time to ensure 180°F final rinse
- Bulit-in electric booster for 180°F final rinse water
- Pumped drain
- Door safety switch
- Low-water tank heat protection
- Detergent and rinse aid pumps
- Quiet double-wall construction
- 15-3/4" door opening to accept larger wares, including trays
- Stainless steel top and side panels
- 141 second cycle
- Wash pump, 1 Hp motor
- Fill and dump
- Prime switch on control panel
- Automatic tank fill
- Advanced Digital Temperature Monitoring
- One year parts and labor warranty
Warranty
Parts & Labor: 1 year & 5 months after date of shipment
Parts & Labor (Glasswashers): 120 days after date of shipment
Champion Industries Inc. (herein referred to as Champion ), 3765 Champion Blvd, Winston-Salem, North Carolina 27105 and P.O. Box 301, 2674 N. Service Road, Jordan Station, Canada, L0R 1S0, warrants machines, and parts, as set out below.
Warranty of Machines: Champion warrants all new machines of its manufacture bearing the name "Champion" and installed within the United States and Canada to be free from defects in material and workmanship for a period of one (1) year after the date of installation or fifteen (15) months after the date of shipment by Champion, whichever occurs first. [See below for special provisions relating to glasswashers.] The warranty registration card must be returned to Champion within ten (10) days after installation. If warranty card is not returned to Champion within such period, the warranty will expire after one year from the date of shipment.
Champion will not assume any responsibility for extra costs for installation in any area where there are jurisdictional problems with local trades or unions.
If a defect in workmanship or material is found to exist within the warranty period, Champion, at its election, will either repair or replace the defective machine or accept return of the machine for full credit; provided, however, as to glasswashers, Champion's obligation with respect to labor associated with any repairs shall end (a) 120 days after shipment, or (b) 90 days after installation, whichever occurs first. In the event that Champion elects to repair, the labor and work to be performed in connection with the warranty shall be done during regular working hours by a Champion authorized service technician. Defective parts become the property of Champion. Use of replacement parts not authorized by Champion will relieve Champion of all further liability in connection with its warranty. In no event will Champion's warranty obligation exceed Champion's charge for the machine. The following are not covered by Champion's warranty:
- Lighting of gas pilots or burners.
- Cleaning of gas lines.
- Replacement of fuses or resetting of overload breakers.
- Adjustment of thermostats.
- Adjustment of clutches.
- Opening or closing of utility supply valves or switching of electrical supply current.
- Cleaning of valves, strainers, screens, nozzles, or spray pipes.
- Performance of regular maintenance and cleaning as outlined in operator’s guide.
- Damages resulting from water conditions, accidents, alterations, improper use, abuse, tampering, improper installation, or failure to follow maintenance and operation procedures.
- Wear on Pulper cutter blocks, pulse vanes, and auger brush.
Examples of the defects not covered by warranty include, but are not limited to:
- Damage to the exterior or interior finish as a result of the above
- Use with utility service other than that designated on the rating plate
- Improper connection to utility service
- Inadequate or excessive water pressure
- Corrosion from chemicals dispensed in excess of recommended concentrations
- Failure of electrical components due to connection of chemical dispensing equipment installed by others
- Leaks or damage resulting from such leaks caused by the installer, including those at machine table connections or by connection of chemical dispensing equipment installed by others
- Failure to comply with local building codes
- Damage caused by labor dispute.
Warranty of Parts: Champion warrants all new machine parts produced or authorized by Champion to be free from defects in material and workmanship for a period of 90 days from date of invoice. If any defect in material and workmanship is found to exist within the warranty period Champion will replace the defective part without charge.
DISCLAIMER OF WARRANTIES AND LIMITATIONS OF LIABILITY. CHAMPION 'S WARRANTY IS ONLY TO THE EXTENT REFLECTED ABOVE. CHAMPION MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED, TO ANY WARRANTY OF MERCHANTABILITY, OR FITNESS OF PURPOSE. CHAMPION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. THE REMEDIES SET OUT ABOVE ARE THE EXCLUSIVE REMEDIES FOR ANY DEFECTS FOUND TO EXIST IN CHAMPION DISHWASHING MACHINES AND CHAMPION PARTS, AND ALL OTHER REMEDIES ARE EXCLUDED, INCLUDING ANY LIABILITY FOR INCIDENTALS OR CONSEQUENTIAL DAMAGES.
Shipping
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options.
You can view our shipping policy here.
Returns/Refunds/Damages
Customers have 48 hours to inspect and report damages & no item may be returned after 30 days of the original ship date from our facilities.
Items that are returned damaged or without proper packaging materials are subject up to a 25% restock fee.
You can view our shipping policy here.
Product Specifications
| Brand | Champion |
|---|---|
| Model Number | UH130B |
| Weight | 215 lbs |
| Width | 24" |
| Depth | 25" |
| Height | 33.75" |
| Temperature | high temp with booster |
| Rack capacity | approximately (25) racks/hour |
| Rack Size | 20" x 20" |
| Construction | stainless steel |
| Tank Heat | electric |
| Cabinet base | fully enclosed |
| Door Clearance | 16" |
| Water Consumption(Approx) | 38 Gallons Per Hour |
| Number Of Wash Cycle | 1 |
| Voltage | 208, 240 |
| Phase | 1, 3 |
| Height Of Legs | No Leg |
Documents
Shipping and Returns
If you've used this product, log in and leave a review to tell us and other customers what you thought about it! Earn up to $16 towards your next purchase for submitting a text, photo, or video review for this item. View your account for details
Write a text review
Earn $2.00
Post a product photo
Earn $4.00
Post a product video
Earn $10.00