Description
- Forced air, self-contained refrigerated merchandiser (for the refrigerated cases only)
- Modern design for merchandising beverages, cheese, sandwiches and much more
- Exterior tempered safety glass
- Removable rear sliding glass doors
- Designed for mobility, reliability & efficiency in commercial kitchens
- (2) Height Adjustable shelves
- Slide out condensing unit for easy maintenance
- Four (4) casters
- Simple plug-in installation
Features
Durable Design
Forced air, self-contained refrigerated merchandiser
(for the refrigerated cases only)
• Modern design for merchandising beverages, cheese,
sandwiches and much more
• Exterior tempered safety glass
• 2 Removable rear sliding glass doors
• Designed for mobility, reliability & efficiency in
commercial kitchens
• (2) Height Adjustable shelves
• Slide out condensing unit for easy maintenance
• Four (4) casters
• Simple plug-in installation
Energy Efficiency
Digital temperature readout display with electronic
thermostatic control
• Double layer glass for front and sides with the film
heaters inside of the glass.
(for the dry cases: double layer glass but without heaters.)
• LED lighting at top & under shelves
• Automatic defrost system
• Case holds 36°F - 41°F
Superior Quality
Stainless steel lower body panels
• Solid body construction
• Certified to ETL safety and
sanitation standards
• CFC-free refrigerant with R-134a gas
Warranty
MVP Group Corp. and MVP Group LLC. (Henceforth MVP Group) warrants all new equipment installed within the United States of America (including Puerto Rico) or Canada to be free from defects in material or workmanship, under normal and proper use and maintenance as specified by MVP Group and upon proper installation and startup in accordance with the instruction’s manual supplied with each unit. Warranty shall not cover standard wear and tear of parts or issues caused by improper installation or lack of basic preventative maintenance. MVP Group shall bear no responsibility for parts or labor coverage for component failure or other damages resulting from improper usage, installation, or maintenance as described in the owner’s manual. For further details see Damages, Alteration and Connection sections below.
MVP Group Corp. and MVP Group LLC. (Henceforth MVP Group), (KOOL-IT) warrants to the original purchaser of all new KOOL-IT units to be free from defects in material or workmanship, under normal and proper use and maintenance service as specified by MVP Group and upon proper installation and start-up in accordance with the instruction packet supplied with each unit. MVP Group’s obligation under this warranty is limited to a period from the date of original installation.
• Three-year parts and labor warranty. Additional two-year warranty on compressor (part only): All KBSR, KBSF, KTSR, KTSF, KST, KSTM, KPT, KCB, KUCR and KUCF models.
• Two-year parts and labor warranty. Additional three-year warranty on compressor (part only): All KGM, KSM and KGF models.
• One-year parts and labor. Additional four-year warranty on compressor (part only): All KOM, KBF, KCD and KII models.
Warranty and Service Coverage: This warranty does not apply to, and MVP Group is not responsible for, any warranty claims made on products sold or used outside the United States of America, Puerto Rico, and Canada. Parts are exempt, however, in case of warranted parts, the original purchaser must provide a technical report to MVP Group stating the part is failed to perform its duty, non-functioning or malfunctioning. For rural areas, MVP Group will cover up to a maximum of 2 hours travel time and diagnostics time allowance of 1.5 hours. Should additional time be needed, written approval is required.
Non-Transferrable: This warranty is not assignable and applies only in favor of the original purchaser/user to whom the equipment was delivered. Any such assignment or transfer shall void the warranties herein and shall void all warranties, express or implied, including any warranty of merchantability or labor coverage for component failure.
Alteration, neglect, misuse, abuse, accident, damage during transit or installation, vandalism, terrorism, wind, flood, fire, or Acts of God: MVP Group is not responsible for the repair or replacement of any parts that are determined to have been subjected after the date of manufacture to alteration, neglect, misuse, abuse, accident, damage during transit or installation, vandalism, terrorism, wind, flood, fire, or Acts of God. Furthermore, MVP Group is not responsible for the repair or replacement of any unit which is found to have used nonfactory specified and/or original components.
Terms Applicability: Any parts covered under warranty that is determined by MVP Group to have been failed to perform its duty, non-functioning or malfunctioning within the specified applicable warranty time frame, is limited to the repair or replacement, including labor charges, of failed to perform its duty, non-functioning or malfunctioning parts or assemblies. The labor warranty shall include standard straight time labor charges only and reasonable travel time, as determined by MVP Group service provider agreement. Please refer to the brand in question for full warranty details.
Claims & Limitations: All claims for labor or parts and/or both must be made directly through MVP Group. All claims should include model number and serial number of units, proof of purchase, date of installation, and all pertinent information supporting the existence of the alleged defect. In case of warranted compressor, the original purchaser must provide a technical report to MVP Group stating the part is failed to perform its duty, non-functioning or malfunctioning. All claims should be filed within 30 days of completed repair or the warranty claim could be refused. All other warranties, either express or implied, arising under law or equity or custom of the trade, including but not limited to, warranties or merchantability or fitness for a particular purpose, are excluded. MVP Group’s liability on any claim, including but not limited to negligence, shall not exceed the price of the equipment that gives rise to the claim. In no event shall MVP Group be liable for any other damage or loss, including, but not limited to, loss of products, loss of profits, loss of sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities, or services, or any other special, incidental, or consequential damages regardless of whether or not they result from equipment failure. Warranty Limitation. This part and labor warranty is the sole warranty policy offered by MVP Group. MVP Group’s sole obligation under this warranty at its discretion is limited to either repair or replacement of parts and is subject to the limitations listed below.
Improper electrical, water or gas connection, connection maintenance and equipment maintenance: MVP Group - General Warranty Statement - JANUARY 2021 FINAL.docx 2021-02-18 9:16:00 AM Page: 3 MVP Group is not responsible for the repair or replacement of failed or damaged equipment and/or components resulting from improper installation and maintenance of either electrical, water or gas connections and their maintenance as it relates to the usage of equipment.
Food Trucks, Food Trailers and Mobile Kitchens: Twelve (12) Months Limited Parts & Labor Warranty: MVP Group provides twelve (12) months limited parts and labor warranty from the time of purchase for any new equipment that is installed in any kind of mobile vehicles, not limited to, trucks, trailers, food trucks, or boats. MVP Group assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential building applications. Any equipment that has been altered, modified or utilized in any manner other than how the equipment has originally been designed, or to be used will have the warranty nullified and voided automatically. Application of this exception to MVP Group’s general warranty policy is wholly under MVP Group’s discretion.
Residential: MVP Group assumes no responsibility nor liability for any parts, or labor coverage for component failure, or other damage for units installed in residential and/or non-commercial applications. MVP Group equipment is intended for commercial use only and this warranty is void if the equipment is installed anywhere other than commercial applications.
Shipping
You can view our shipping policy here.
Returns/Refunds/Damages
Returns without an authorization number from MVP Group will not be accepted. To request a return authorization, please contact Chilly Cellar or call 1-888-275-4538 ext. 263. You can also email returns@mvpgroupcorp.com
* All return requests must be received within 90 days from date of invoice and received in our warehouse within 120 days from days from date of invoice.
CONDITIONS FOR RETURN OF AN UNUSED ITEM OR ORDER CANCELLATION:
- The return must be requested within 90 days from date of invoice of the item(s).
- The unit must be in its original packaging (pictures are required).
- The purchase order number, reason for return, and the serial number(s) of the unit are required.
- Freight costs must be covered by the dealer or the end user.
- A 35% restocking fee will apply.
CONDITIONS FOR FREIGHT DAMAGE:
A thorough physical inspection of the unit(s) is required upon delivery, prior to signing the BOL. Any damages to the box(es), crate(s) or unit(s) must be clearly notated on the BOL. All freight damage cases must be analyzed by the Returns Department before accepting any return.
ACCEPTED FREIGHT:
- All damages must be notated on the BOL.
- PO number, serial number, pictures and written details of the damaged unit must be provided in order to process the return.
REFUSED FREIGHT:
- In the event of refused freight, please notify us ASAP if a replacement is required.
CONCEALED DAMAGE:
- Concealed damage can only be filed within 5 business days of the unit being delivered.
- Provide the PO number, serial number, and pictures of the box, crate and unit in order for the case to be analyzed. (Please note that most of the time, these claims are declined, therefore it is very important the units are inspected before signing the BOLs).
RETURN OF USED OR DEFECTIVE ITEMS
If the item you received is defective, please contact our service department; they will evaluate the issue and schedule a service call if needed. MVP Group will only accept returns of used items if the service department concludes that the unit is not repairable and that the issue is a manufacturer defect.
Product Specifications
|
Documents
Shipping and Returns
If you've used this product, log in and leave a review to tell us and other customers what you thought about it! Earn up to $16 towards your next purchase for submitting a text, photo, or video review for this item. View your account for details
Write a text review
Earn $2.00
Post a product photo
Earn $4.00
Post a product video
Earn $10.00