Omcan 46671 | 24" Wide 3 Tray 0.648kW Blast Chiller

Description

Blast Chillers cool food rapidly by circulating cold air through the unit until temperature falls down to safe levels. These units are designed to quickly lower the temperature of foods to minimize bacterial growth ensuring food down through the danger zone within minutes compared to the hours it takes when stored in a refrigerator. Blast chillers also offer an advantage over traditional freezer by rapid freezing the food which produces fewer and smaller ice crystal resulting with minimal damage to the food.
This improves the frozen food's texture once it is reheated. Although they are typically more expensive than traditional refrigerators, they are mostly used in hotels, restaurants, and food operation business.

Features

• Time or core probe control
• Internal glossy finish
• External scotch-brite finish
• 60 mm high density polyurethane foam insulation, CFC and HCFC-free
• Core probe included
• Removable grids-rack for easy cleaning
• Air condensation
• Manual defrosting
• Automatic cold holding at the end of cycle

Warranty

Omcan provides warranty against all defects of material and manufacturing, as well as for defective assembling, for all the products that we sell. The warranty periods vary based on our product categories listed above.

Omcan will provide our customers or end users with onsite warranty coverage on all equipment in excess of 115 pounds / 52 kilograms. For lighter products, Omcan will provide carry in bench warranty. Bench warranty means that the product must be dropped off or delivered to us, or to one of our authorized service centers (at Omcan’s discretion), freight prepaid, for warranty evaluation. We will not accept COD or collect shipments.

Conditions of Omcan Warranty:

1. A copy of the Bill of Sale and/or serial number is required for all warranty claims.
2. The on-site warranty applies to regular week day hours. Costs associated with holidays, weekends, evening or rush service calls will be the responsibility of either the end user or Omcan dealer.
3. Remote geographic locations may limit guarantee to a parts only warranty. Labor, travel and mileage covered under warranty include straight time labor charges and travel charges within 100 miles / 160 km, roundtrip. Overtime, premium labor charges and travel charges in excess of this round trip distance will not be covered by OMCAN and will be the responsibility of the person or firm requesting the service.
4. There is no on-site warranty for residential addresses (unless specified differently).
5. Warranty is valid only in country of purchase.
6. Omcan reserves the right to either repair or replace a product at our discretion.
7. This warranty does not apply to abuse, willful or accidental damage, or to products used for other than their intended purpose.
8. Any tampering or modifications to any products automatically cancels the warranty guarantee. Items not covered by our guarantee include components which are subject to natural wear and tear. Products subject to abuse, misapplied, misused, subjected to harsh chemical action, or external causes such as electric power fluctuations or poor water quality, field modified (without the approval of Omcan), improperly installed or maintained, damaged by flood, fire or other acts of God, or which have altered or missing serial numbers automatically void warranty.
9. This warranty is not transferable and is limited to original installation of equipment sold by Omcan for the original user.
10. This warranty does not apply to any equipment that has not been installed in accordance with the directions published in the appropriate installation and operation manuals.
11. If the equipment have been changed, altered, modified or repaired with parts not authorized by Omcan or by a non-qualified Service Technician, then Omcan shall not be responsible for warranty claim.
12. Adjustments such as calibrations, leveling, tightening of fasteners or utility connections normally associated with original installation are the responsibility of installer and not that of Omcan. Regular maintenance, such as cleaning, greasing, de-scaling, tightening, sharpening, or anode parts shall be the responsibility of the customer.
13. If required by Omcan, customer shall return to Omcan for examination of any failed product or part to confirm that the part has failed as a result of material or workmanship.
14. All parts orders are shipped via ground courier only. Extra rush shipment charges will be the responsibility of the end user or dealer.
15. Dealers and end users should not replace or authorize repair of Omcan equipment without an approved return authorization number. Cost incurred in such repairs will be at the dealers or end user’s expense.
16. For an end user onsite service call, Omcan will require a credit card pre authorization, until the technician determines it is a warranty repair.

This warranty and the liabilities set forth herein are exclusive and in lieu of all of their liabilities and warranties, express or implied, including but not limited to, implied warranties of merchantability and fitness for particular warrantee purpose and constitutes the only warranty of Omcan. Omcan’s liability on any claim, including but not limited to negligence, shall not exceed the price of the equipment that gives rise to the claim.

The foregoing warranty is the entire warranty of Omcan. Omcan neither assumes nor authorizes any other person, purporting to act on its behalf, to modify or to change this warranty, or any other warranty or liability concerning Omcan equipment. This warranty provides the exclusive remedy against Omcan relating to all Omcan products, whether in contract or in tort or under any other legal theory, and whether arising out of warranties, representations, instructions, installations or defects from any cause. OMCAN shall not be liable, under any legal theory, for loss of use, revenue or profit, or for substitute use or performance, or for incidental, indirect, or special or consequential damages or for any other loss of cost of similar type. The liability of Omcan is limited to the repair or replacement of any part found to be defective.

Shipping

Upon receipt of an Omcan shipment, please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and that there is no concealed damage to the item(s). If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the item(s) must be filled out within three days from the delivery date shown in the shipping documents. Omcan has no recourse for damaged products that were shipped collect or third party. In the event of a shortage, or if damage is detected on a collect or third party shipment, notify the delivering carrier at once to request an inspection and file a claim promptly. Any delay may cause you a loss. Shortage of goods to be reported within 5 business days to an Omcan customer service representative. Damage of goods to be noted on the delivery receipt and reported within 24 hours to an Omcan customer service representative. We cannot reimburse claims for shortages or delays caused by the carrier responsible. By signing your name on the delivery receipt without noting any damages, you are stating that you have received your shipment in acceptable condition.

Returns/Refunds/Damages

Returns will not be accepted unless approved in writing. Minimum return amount of $100.00 list. Returned goods must be received back to Omcan within 30 days of purchase. To obtain a return authorization, please call 1-800-465-0234. All authorized returns must be shipped freight prepaid. A restocking charge of 35% will apply to unused products in their original packaging. Return of used products is subject to inspection and a restocking charge of 50% or more may apply. Special order, clearance, parts, demo items, vacuum pack bags, or non-standard items are not returnable.

Parts received damaged, should be reported within 24 hours to parts@omcan.com (Please include pictures). No Refunds or returns on Parts orders.

Product Specifications

Documents

Spec Sheet

Manual